Pfaff pfaff Sewing Machines User Manual download pdf (Page 2)

11:2

Maintenance

Cleaning the machine

To keep your sewing machine operating well, clean

it often. No lubrication (oiling) is needed.

Wipe the exterior surface of your machine with a

soft cloth to remove any dust or lint built up.

Note: Use of cleaners or solvents on the machine can

cause damage to the plexifront. Clean only with a soft

dry cloth.

Wipe the PFAFF® HD screen with a clean, soft and

damp cloth.

Cleaning the bobbin area

Note: Lower the feed dogs by pressing presser

foot up and extra lift. Turn off the machine.

Remove the presser foot and slide off the bobbin

cover. Place the screwdriver under the stitch

plate as shown on the picture and gently turn

the screwdriver to pop off the stitch plate. Clean

the feed dogs with the brush found with the

accessories.

Cleaning under the bobbin area

Clean the area under the bobbin case after

sewing several projects or any time you notice an

accumulation of lint in the bobbin case area.

Remove the bobbin case holder (A) covering

the front part of the bobbin case by lifting it up.

Remove the bobbin case (B) by lifting it up. Clean

with the brush.

Note: Use caution when cleaning around the

thread snips knife.

Put the bobbin case and the bobbin case holder

back in place.

Note: Do not blow air into the bobbin case area. The

dust and lint will be blown into your machine.

Replacing the stitch plate

With feed dogs lowered, place the stitch plate with

the knob ﬁ tting into the notch at the back (C). Press

the stitch plate down until it clicks into place. Slide

on bobbin cover.

1 2 3 4 5 6 7 ... 11 12

No comments

Pfaff pfaff Sewing Machines User Manual Page 2