Pfaff 1540 User Manual download pdf (Page 10)

Removing the housing covers

Note:

Before adjusting or repairing the machine, make sure to remove the housing covers as described

in this manual.

z Disconnect the machine's main plug.

z Remove needle and presser foot.

z Remove detachable work support.

z Remove top cover.

z Switch on bobbin winder.

z Remove the two Torx screws of the housing insert..

z Remove housing insert.

z Lay the machine on its back and remove the four fastening screws of the baseplate.

z Remove baseplate.

z Remove the two fastening screws 1 of free-arm cover (fig. 1).

z Pull the left-hand side of the free-arm cover a little bit downwards and remove it towards the left.

z Remove needle plate.

z Remove the two fastening screws 2 of the upper free-arm cover (fig. 2).

z Loosen fastening screw 3 of free-arm cover.

z Remove free-arm cover.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 105 106

No comments

Pfaff 1540 User Manual Page 10